MCPC352-808 line metalens uses advanced metasurface technology and semiconductor lithography technology to provide multiple key performance advantages based on silicon materials and Schott glass substrates.
Metasurface technology grants higher design freedom, redefines lens products, optimizes designs according to the requirements of spot distribution, and uses corresponding free-form surface design solutions. Metalens has advantages of small size, making the packaged volume of metalens and light sources more compact. Metasurface technology grants higher design freedom, redefines beam of light shaping products, makes light spots more uniform, efficient, and compact. The line metalens is realized with a single lens, eliminating the need for complex optical structures. This approach not only simplifies assembly, reducing both time and costs, but also minimizes errors introduced during assembly, thereby enhancing overall performance.
Thanks to the semiconductor lithography process, the product has excellent performance in consistency. In addition, the product has high thermal stability, and can withstand reflow soldering, which greatly facilitates further assembly.
| Device parameters | |
|---|---|
| Model | MCPC352-808 |
| Material | Si, SiO2 |
| Length and width | 2.8mm × 2.8mm |
| Thickness | 0.775mm |
| Active area diameter | 2.5mm |
| Output of light spot shape | Line |
| Divergence angle (long axis) | 120˚+/-5˚@808nm wavelength |
| Line width (at 30 cm) | ~4.0mm typical |
| Edge-to-middle ratio | 2.0 typical |
| Transmittance | 75% typical |
| The distance from the light source face to the metalens | 4mm |
| Operating temperature range | -40°C~105°C |
| Storage temperature range | -40°C~125°C |
A VCSEL light source is used to assess the optical performance of the MCPC352-808 line metalens.
The evaluation setup is shown in the figure below：
| Input of light source | |
|---|---|
| Type | VCSEL |
| Wavelength | 808nm |
| Divergence angle | 25° |
| Emission Aperture spacing | 40μm |
| Number of Emission Aperture | 20 |
| Output light spot | |
|---|---|
| Shape | Line |
| Divergence angle (long axis) | 122˚ |
| Line width (at 30 cm) | 3.7mm |
| Edge-to-middle ratio | 1.9 |
| Transmittance | 75.8% |
| The distance from the light source face to the metalens | 4mm |
Metalens Design & Fabrication Services: From Concept To Mass Production
Metalenses Vs. Traditional DOEs And Refractive Lenses: A Comprehensive Comparison
