MCPA351-940 Imaging Metalens

Features #

  • Metasurface technology
  • Full planar structure
  • Wavelength: 940nm
  • High relative illumination
  • Single lens replaces multiple traditional lenses  
    • Compact size: BFL = 0.7mm
  • FOV: 45° x 45° x 66°
  • Semiconductor process, high product consistency
  • High temperature resistance, compatible with reflow soldering / wave soldering process
  • Operating temperature range: -40°C ~ 105°C
  • Storage temperature range: -40°C ~ 125°C
  • Small size (L x W x H)
    • 2.8mm x 2.8mm x 0.775mm
    • 1.8mm x 1.4mm x 0.775mm

Product Overview #

MCPA351-940 imaging metalens uses advanced metasurface technology and semiconductor lithography technology, based on Si material and Schott glass substrates, this revolutionary product provides a series of key advantages.

Metasurface technology grants higher design freedom, redefines imaging lens products, achieves true free-form surfaces, achieves multi-lens imaging effects with a single lens, makes its volume more compact, and eliminates the need for axis alignment between lenses. At the same time, imaging metalens have a small chief ray angle, which can still obtain higher relative illumination when the sensor does not have a micro lens. Imaging metalens have a smaller f number and a larger aperture to receive signal light, thereby improving the efficiency of the entire imaging system or sensing system.

Thanks to the semiconductor lithography process, the product has excellent performance in consistency. In addition, the product has high thermal stability, and can withstand reflow soldering, which greatly facilitates further assembly.

Product Applications #

  • Flash LiDAR
  • Laser ranging
  • Laser obstacle avoidance

Product Appearance #

Specifications #

ParameterValueUnit
Sensor pixels8 × 8Pixels
Pixel size59.4 × 59.4μm
Wavelength940nm
Effective focal length0.627NOTE 1mm
Back focal length0.7mm
Horizontal FOV45°
Vertical FOV45°
Diagonal FOV66°
Circle diameter0.674mm
MTF@Nyq/2 (8lp/mm)
Center Field of View-S            0.95
0.7 field of view-s                          0.907
F#                         1.4
SMIA TV Aberration               -12%
Relative illumination                   @ Side 0.83, @ Corner 0.67
Chief ray angle-0.35°
Total optical length1.525mm
IR filter bandwidth30nm
IR filter thickness0.3mm
Operating temperature-40~125°C
NOTE 1: Facing sensor

Application Information #

The following is real-life imaging picture of the imaging metalens:

imaging metalens test result

The size information of the supporting holder structure to measure and evaluate the above imaging is as follows:

Figure 6-1: MCPA351-940 Holder Structure Information

Structural Parameters #

Related Documents #

Integrated Meta Optics

Metalens Design & Fabrication Services: From Concept To Mass Production

Metalenses Vs. Traditional DOEs And Refractive Lenses: A Comprehensive Comparison

Updated on November 18, 2024
What are your feelings

Leave a Reply

Your email address will not be published. Required fields are marked *